I would only need to add a second ip helper address to make it work but for the save of simplicity, I'll just go ahead and configure it locally on the switch: In a production environment, you usually see DHCP centralized on a server and I could easily do so for my lab as well. In a production environment, you usually have policies already set up and you can restrict this with d0t1x and profiling but in my lab, I don't have any policies set up yet so I need these servers and the ASA to continue to have access: Ip route 0.0.0.0 0.0.0.0 10.1.10.99 <- This is the inside interface of my ASA 5506įor ports that are directly connected to my server and ASA, I'll start by giving them a base configuration without restriction. I also include an ip helper-address to the ISE server (10.1.100.21) so ISE can collect additional DHCP profiling information: Next, I'll configure the my Layer 3 configuration. Username admin privilege 15 password networknode I'm starting with a completely unconfigured switch so to start, I like to configure it with a username, SSH, etc: I'll walk through some of the basic configurations and explain why I'm configuring it as I am. In this blog post, I'm going to set up my 3650 switch with basic Layer 2, Layer 3 and dot1x configurations.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |